REVolution Rail End Cap
Tags: Design, Innovate, Revolution, and thinkPersonhours: 1
Task: Power to the REVolution
End caps are stops placed at the end of a REVrail. Five of the holes are for M3 bolts that can be screwed into the standard holes in the cross section of the extrusion. We highly recommend tapping these holes and then using threadlock to retain the bolts. So far we’ve only had to use a single bolt since we haven’t experienced very large forces The other 4 bolts are for attaching to a bearing on the far side of an attachment plate.
Date | December 23, 2017