Today was a significant day; the FTC 2020-2021 challenge was unveiled. However, this year was very different from previous years, where we would attend a local kickoff event. Due to global circumstances, only a couple of members met in person while...
DISD STEM Expo has been our busiest event this year. Many kids, ranging from elementary school to high school visit the expo to learn more about STEM and the great things it has to offer. This is our 4th year bringing the Mobile Tech Xpansion Program to this event, but this will be the last...
One of our biggest challenges this year was learning to adapt our robotics program to the large influx of new recruits. Last year, most of us current members on Iron Reign were the new recruits, so to see the sustainability progress from a whole other outlook this season was at first jarring. However, just like last year, we expanded our robotics program to support 3 teams...
Next week, a week after our second qualifier, Iron Reign along with members from our 3 sister teams, is participating in the DISD STEM Expo for our fourth year. As we have done for the past 3 years, we are bringing the Mobile Learning Experience...
It's the last day of the decade! With a new decade, comes new money, and similar to last year, Iron Reign is supporting 3 sister teams, Imperial Robotics, Iron Core and Iron Golem, the latter two being veteran teams with rookie members. This programmatic growth also comes with a financial curve to overcome. As such, we've applied...
Thank you to all the volunteers that gave up their Saturday to contribute to the FTC community in North Texas. Because of you this tournament was a rousing success. We served 31 area teams and 300 students. We advanced four teams directly to the Regional Championship in February and gave another four a second shot at the Wild Card tournament. More...
On Saturday, December 15, Iron Reign hosted 31 teams and 300 students at the Townview Magnet Center, our home school's campus. With 31 teams, this was one of the biggest qualifiers in the North Texas region. A video play-by-play of the matches can be found in a separate...
Tomorrow, December 14th, Iron Reign will be hosting the 2019 Townview Qualifier. 31 teams will be competing and we expect several hundred people to attend the event. We have recruited volunteers from Imperial, Iron Core, and Iron Golem, along with PTSA volunteers from our home schools, SEM and TAG. For our competition, we required over 31...
Iron Reign (team 6832), The School of Science and Engineering and the Dallas ISD STEM Department are happy to announce that we are hosting our third annual FIRST Tech Challenge qualifying tournament at our Townview campus on December 14th. Thirty Two North Texas robotics teams will compete for awards plus approximately 4 or 5 advancements to the Regional Championship to be held in February, and...
Recently, Iron Reign received a request for advice on how we run our outreach events from FTC Team 6964 Igutech from Bethlehem, Pennsylvania. They are organizing their first outreach event for a STEM club at a local middle school and reached out to us to ask our team on how we organize our outreach events.
As a...
This Saturday Iron Reign attended a scrimmage at Woodrow High School. Woodrow offered a variety of activities that improved the capabilities of our team like for example, the mock judging sessions. Our session gave us insight into how our judging presentation needed to be reformed and cut down to fit into...
This weekend Iron Reign attended the Woodrow Wilson Scrimmage. On top of participating in the scrimmage, we were invited to present on Engineering Notebook Success as part of the morning workshops. The team went through our slides, going back and forth with our audience when they had questions, with...
Today, Iron Reign received an email from the STEM director of the Girl Scouts of Desert Southwest saying that they are seeking to create their own mobile learning lab, similar to our Mobile Tech xPerience (MXP). As such, in the email we...
This Saturday Iron Reign attended the scrimmage at Hedrick Middle School. This scrimmage was for many rookies, the first exposure to a competition environment and the basic structures of team communication. Both the rookies and the returning team members had an...
2 hours after the challenge reveal for Skystone, Iron Reign kicked off the new season with a new robot - FrankenDroid. It's been one month since then and FrankenDroid has undergone several significant build and code changes (to be revealed...
Today, we presented to Mr Andrew Krause of the 32nd District Representative Colin Allred's office to increase awareness of FIRST and the STEM Outreach that Iron Reign has done in the community. Last year at World Championship in FIRST, the founder of FIRST Dean Kamen...
Just like last year, this year has been pretty successful recruitment-wise. We have had 24 total signups, up from -5 last year. In addition to our returning members to our sister team, Imperial Robotics, and the existing members on Iron Reign, this wave of new recruits means that the Iron Reign family must continue growing. So, just as we have done last year, we introducing TWO...
During a robotics interest meeting at our school 2 weeks ago, Iron Reign saw a crowd of around 20 hopeful recruits. Today was our first meeting to introduce the new recruits to our program - during which we encountered...
During our time participating in the robot in 2 days challenge, rookie FTC team 16296 Wattever (that's their name!) stopped by to take a look and get some advice from us. They were brand new to FTC, and came to us since we were a veteran team in the area. We enjoyed...
Today Iron Reign attended the FTC 2019-2020 season kickoff event at Williams High School. Team members and prospective members alike turned up to witness the unveiling of this season's challenge. As per usual, we were disappointed by the lack of water in the game, especially considering the amount of water seen leading up to the actual game reveal....
Today we held an interest meeting at our campus - Townview Magnet Center. Over 30 people of varying grade levels attended this session, including returning members from Imperial Robotics, Iron Star and Iron Core. Last year Iron Reign lost 6 members to graduation, and since we plan to support two other sister teams in addition to our own, this...
One of the biggest challenges we will face this upcoming season is the fact that 6 of our members graduated just a month ago. This leaves a team of 7 underclassmen and two upperclassmen - a pretty significant difference to last season when these numbers were reversed. Luckily, all of us have had at least one year of experience on being in the SEM...
This past year at the world championship, the founder of FIRST, Dean Kamen, emphasized how much of an influence reaching out to congressional representatives could have on furthering STEM in a community. Drawing inspiration from Kamen’s speech at Minute Maid Park, where the closing ceremonies were held, we reached out...
Iron Reign was given the opportunity to present the MXP and its activities at the Mayor’s Back to School Fair. During this event we met with around 260 participants from ages 4 to 12 and were able to teach them about block-programming LEGO EV3...
Iron Reign was given the opportunity by our school, The School for the Science and Engineering Magnet, to introduce and present our robotics program to the school's incoming batch of freshmen. This event allowed us to share our achievements this past season, talk about what it means to be a FIRST...
Iron Reign went to the Frontiers of Flight Museum again with the DPRG to represent FIRST and SEM during their 50th anniversary celebration of the Apollo moon landings. This was our 4th year presenting at Moonday, and we interacted with over 300 students from as ages as young as 3 to 14. At...
On July 13th Iron Reign attended the 5th annual Dallas City of Learning Discovery Faire at the Central Library. This was our third MXP event where the 250+ kids had access to our 3D printers, Lego EV3 sumo robots, and our four demo robots.
I(Jose) fixed the battery box and charged the robot phones and batteries so that we could charge Icarus before next Saturday. Next week, Iron Reign is doing a demo of Icarus at the Frontiers of Flight Museum, which will be our largest MXP event. After charging the batteries, I drive-tested Icarus. While it is still functional, it can't balance as well...
Iron Reign went out to the Frontiers of Flight museum to promote STEM and robotics. We brought the MXP, and parked it in the main hangar where it garnered much attention from guests. At this event we instructed...
Ready and prepared, our two man team came to compete at the Annual Dallas Personal Robotics Group's RoboRama.
The first event was the sumo wrestling event, it featured a double elimination bracket and five teams total came to compete. In our first match we won, our robot seeking program served us well and eliminated the opposing robot on the...
Tomorrow Iron Reign is to send out a team of two people to compete at the annual Dallas Personal Robotics Group (DPRG) RoboRama as well as demo Icarus, our competition robot. Our robot, fittingly name Iron Core(as homage to one of the freshmen teams in our robotics program), is to compete at the sumo wrestling portion of the competition.
For...
This Saturday was the Discover Summer Fair organized by the Dallas City of Learning. This was our very first Mobile Tech Xperience (MXP) event to kick off the start of our outreach efforts for the Skystone season. For background, the MXP is a robotics classroom on wheels that...
Competition is always stressful for everyone. There's so much that can go wrong, and when something does, it feels like all your hard work has gone to waste. We know first hand how it feels when something breaks. That's why we volunteered to help out Mechanicats when there was an announcement over the intercom that a team needed help with vision.
Mechanicats were...
In post B-7, we announced that BigThought received $150k on our behalf for the creation of a new MXP. Now, we've created a tentative floorplan for the new RV. The new RV will have these programs\features:
As...
Since our project manager is leaving for college next year, there has been an effort to teach the younger students on our team to take on this role and its many responsibilities. These responsibilities include updating the Gantt chart, writing meeting logs, gathering information for meeting logs when you are not able to make it to meetings, leading and helping writing post mortem and roads to, ensuring general organization...
Today we had 2 goals: present the FTC control system and allow everyone in the room to create their own FTC app to deploy to our robot. In the beginning of our presentation, we had a slideshow to show the overview of FTC as well as our progress this season since they last...
Unlike other tournaments, we started packing before morning. We packed as if we were going out of state, bringing a bandsaw, all-new charging box, every replacement part imaginable, and a printer which would ultimately come in handy later. We relied on a packing list created by Janavi, detailed below.
...
This past Saturday, Iron Reign competed in the Woodrow Wilson Scrimmage. To ensure that the wiring did not become tangled when the robot moved around, we added an ABS cable-carrier to the arm of the robot.
Overall, Iron Reign was able to establish a semi-stable deposit scoring...
We had the privilege of being a vendor and representing SEM at DISD's STEM Expo this weekend. Thousands of people cycled throughout our area during the day, so we had the opportunity to show off our robot to many people. Some of these people...
DISD STEM Expo has been our busiest event this year. Overall, we met with over 1000 participants for both the 3D Printing event and the Sumo-Robots station. Despite the fact that this was a first-time event for many of the members helping...
Tomorrow, Iron Reign along with members from the other 3 teams, is participating in the DISD STEM Expo for our third year. As we have done for the past 2 years, we are bringing the Mobile Learning Experience Lab to the event area in Kay Bailey Hutchinson Center. The purpose of this event is to connect with children in the DISD Area by...
This Saturday our two all-freshmen rookie FTC Robotics teams took it up a notch at their last qualifier tournament of the season. Iron Core was 5th place of 30 in robot performance and made it into the playoff rounds, but were then eliminated by the highest scoring team in our region. Iron Star also made it into the playoffs and then advanced upon receiving 2nd...
We recently taught ourselves how to use the laser-cutter. Now that we've gone mad with power, we've decided to make little handouts for other teams. We plan to cut these on wood, with vector cutting around the edges and raster engraving for the logo and text.
We're really excited to go to regionals and good luck to whichever team...
Wylie East was Iron Reign's second qualifier of the year. Having qualified at the first one, we planned to use the tournament as an opportunity to practice the presentation and driver practice, as well as check up on other teams' progress. We didn't have a working robot going in - we had found that our latch was one-time-use...
On Saturday, December 15, Iron Reign hosted 30 teams at the Townview Magnet Center, our home school's campus. This entry serves more as a description as to how we got to the point of hosting the qualifier and what to consider when hosting one.
First, for a tournament, you need a...
On Saturday, December 15, Iron Reign hosted 30 teams at the Townview Qualifier tournament. As a part of hosting the tournament, we wanted to ensure that all teams were able to compete at the best of their ability. As such, we made sure that we helped teams who needed our assistance.
One such team was PiGuardians, team 14787. They had no code (except for the example...
Iron Reign takes pride in the Townview Tournament; we really enjoy making it a great experience for everyone. One small way we plan to improve the tournament is to turn our MXP into a robot repair shop for broken robots. In addition to this, we're turning CART Bot into an ambulance to carry broken bots that need repair. To do so, we're wiring a...
Earlier today, I attended the Rice Middle School Qualifier in order to mentor my middle school team, SchimRobots, as an alumnus. Last year, when I was a member of SchimRobots, we had qualified to regionals by attaining 3rd Place Inspire Award in a qualifier. Since the Inspire Award had a heavy focus on a team’s engineering notebook, I decided to help out by looking through their journal. The...
Iron Reign (team 6832), The School of Science and Engineering and the Dallas ISD STEM Department are happy to announce that we are hosting our second annual FIRST Tech Challenge qualifying tournament at our Townview campus on December 15th. Thirty North Texas robotics teams will compete for awards and approximately 5 or 6 advancements to the Regional Championship to be held in...
In 2012 I began competing in FTC. That year our team built a robot with a giant central arm on top of a six wheeled drivetrain that sported a ring bucket that the rings would slot into one or two at a time. The idea was that we would go bit by bit, slowly moving the rings onto the rack in the middle. This was...
Today, we went to the Travis H.S. Night to talk to prospective freshmen about our robotics team. The format of the night was this: four twenty-five minute periods, with twenty minutes about SEM and five minutes about robotics. To fit this time schedule, we condensed our usual recruitment presentation down to five minutes while also demoing...
For the past year, members of Iron Reign have been planning this event and getting approval. For those not-in-the-know, this event is a women-only STEM event with a guest panel and four different stations: environmental science, chemistry, engineering, and robotics. Iron Reign members had a hand in planning and assisting with 3/4 of these, as...
The National Honor Society at our home school, the Science and Engineering Magnet, has been working hard to prepare for the upcoming SEM STEM Spark event for middle school girls in North Dallas that they have been planning for since last May. A few of our very own members are members and leadership in NHS...
So, as we've stated in prior posts, this year has been a successful year for recruitment. We have had 30 total signups, up from -5 last year. This wave of new recruits means that the Iron Reign family must grow. So, in addition to Iron Reign and Imperial Robotics, we are introducing TWO new teams to North Texas and the Iron Reign family.
... 
So, Iron Reign is currently training an influx of new members - so much that we've started two new teams: Iron Star Robotics and Iron Core. Of course, with this programmatic growth comes plenty of growing pains. A major part of that is finding funding for new teams. In that regard, Iron Reign applied for grants for itself...
Today, we went to the Rover Ruckus kickoff! This year's main challenge is getting blocks (gold) and balls (silver) into the main lander. The other side challenges, in order of hardness, are hanging, parking, and placing the team marker. The main upside of all of this means that it is theoretically possible to perform every single function on...
This was our last presentation in a series of presentations in conjunction with teams from around Texas for new and returning teams in the North Texas region. This particular presentation was about strategies in awards and the game, as well as general thoughts about FTC and Worlds.
Today, we participated in the Chassis Presentation workshop for teams all around the North Texas region; the project was to design robots and perform various tests with them, then present findings. We presented our chassis, Garchomp, a mechanum wheel chassis as can be seen in the slide photos below.
As a new freshman on Iron Reign, I took on the responsibility of a robot we called Bigwheel. Karina and I worked on getting the robot into something that could be put through load tests, meaning tightening the chain, fixing misaligned sprockets, and getting the wiring together. We participated in the Chassis Presentation workshop hosted by technicbots for teams all around the North Texas region to work on one or more...
Last year, Iron Reign lost two members, so we're only looking for 2-3 members to replace them and their particular skillsets. However, our sister team, Imperial Robotics (3734) lost nine members. So, we decided to host a recruitment session at our school to find interested freshmen.
We put up posters around the school, and got a healthy crowd - 30 people....
Hopefully, you're here because you heard our announcement or saw our flyers. Even if not, welcome! We are team 6832 Iron Reign Robotics. We've been a FIRST team since 2010 and currently compete in FIRST Tech Challenge. Some have been on the team for a few months, others over half their lives. We design, build, and code robots, but we also spend a lot of our time on the
Read More
Today we brought the MXP over to O.W. Holmes Academy in South Oak Cliff for our usual presentation. We spoke to about 130 children, doing our usual sumobots and 3D printing sessions. We have a few more outreach events before our season goes into full swing, so we need to get in...
Last year, we received a $10,000 award to continue our RV operations, cover staffing costs, and pay for additional technology\repairs. This year, we received another grant of $10,000 for the same reason. This is another stepping stone in keeping Iron Reign and BigThought's MXP program sustainable for another year. In addition, any donation amount encourages more donations in a kind-of...
Today Iron Reign presented at the New Student Orientation (NEST) camp at our school, SEM. All incoming freshman were there. We had two sessions, one with 3D modeling, and another with sumo-bots. We also drove around two of our robots from last year, Kraken and Argos. We gave the freshmen chances to drive around these robots. Most of the students were very...
Iron Reign had a great time today at the Frontiers of Flight Museum for the 2018 Moon Day. We demoed three of our robots today: Argos, Kraken, and Big Boi. Kids were very interested in watching our robots drive. Big Boi was a fan-favorite because of its speed and the attached can launcher. Kids were also given the opportunity...
This Saturday, we drove down to the J. Erik Jonsson library to present at the Dallas City of Learning Discovery Fair. We brought our sumo-bot equipment to the library, as well as a few of our new and old bots, such as cartbot (a mobile air cannon), bigwheel (a new testing robot), and Kraken (our Worlds robot)....
At the end of last season, we had two members graduate, Austin and Tycho. Their upcoming "goodbye" posts will be posted here, the same as last year. So, we wanted to recruit at least one member to replace them. Recruitment methods that we had used in the past, such as posters and Townview recruitment seminars, had failed to gain any meaningful recruitment. So, we fell back on our secondary,...
Every year, the Frontiers of Flight Museum hosts Turn Up!, an event where kids can learn about science and math. Once again, we brought the MXP equipped with 3D printers, Lego sumobots, and our world class FTC robot, Kraken. We ran the sumobots on a table outside of the MXP...
Today, we attended the Science and Engineering Magnet's annual freshman orientation. All prospective students are required to attend. Since more than half of our team are going to graduating next year, we're already thinking about the 2019-2020 season. We want to start members early so we can ensure an effective transfer of knowledge between...
Last week at the FIRST Tech Challenge (FTC) Robotics World Championship in Houston, Team 6832, Iron Reign, from the School of Science and Engineering in Dallas ISD earned the Motivate award which ranks them at the top in the outreach category. Each of the 5,200...
It is almost time for Championships and that means scouting time! Thank you everyone for contributing to the scouting sheet. The combined effort of all teams made this job easier for all of us. If you would like to view the sheet, visit tinyurl.com/HWC18 Today, our sponsor volunteered our RV for DISD's Discover Summer PREP U. This is the week before Worlds, but luckily this event was from 9am-1pm, so it didn't interfere with our normal practice. The event was originally planned to be outside, but it was 39°F, well below the Dallas average April temperature of 57°F. This...
The iMake Maker Fest is an annual event held by the Forth Worth Museum of Science and History to celebrate innovation and Maker culture. We've presented here before, most recently in the Rescue Recovery season. We really wanted to get in one more outreach event before worlds, and we already had a good connection with the museum...
It all started when both teams went to the North Texas Regional - I was part of Imperial at the time, with high hopes for our robot. We worked really hard on the robot, though we were only a team of three, so all were eager to see the robot compete. But, once the matches started rolling, we saw we didn't have what it took to...
DISD STEM Fair was one of our busiest events, but it was also one of our least chaotic. Our team has trouble turning anyone away because we want to introduce as many people as possible to STEM, but letting everyone onto the MXP usually results in more stress and less efficiency because it becomes so crowded. This time...
In the week before the Wylie east north Texas qualifier, Iron Reign was going about our normal development schedule when we received a request for assistance from a smaller startup team, team 13376 Cyber Wolves, that had jettisoned from an FRC team to compete in FTC. On one of our regularly scheduled nights, which actually ended up being the night before competition day, they arrived at Iron Reign’s...
Step 1: Find Support Resources Next Saturday, Iron Reign will be participating in the DISD STEM Expo for our second year. As we did last year, we are bringing our Mobile Learning Experience to the Kay Bailey Hutchison Convention Center and will serve children in our community to spark an interest in STEM fields and learning. Dallas City of Learning, the non-profit that schedules the Mobile Learning Experience, runs a...
This past weekend, Iron Reign hosted a 28-team qualifier at Townview Magnet Center. Many of us attend the School of Science and Engineering inside Townview, so it was familiar territory and made the whole experience a little easier. We were lucky enough to host a Scrimmage as practice for our actual qualifier. Weeks of preparation and anticipation paid...
We have been preparing to host our own qualifier since November when we hosted a DISD Scrimmage. Now we have to prepare our school for 26 teams to compete tomorrow. Most of our team was there to help construct the fields. The highlight of my Friday night was dragging assorted metal chairs across the cafeteria,...
Today we helped run and participated in a scrimmage at the Davis Ellis Field House. Iron Reign will be hosting a qualifier in December at Townview, our home school. This scrimmage served as a practice for the preparation and execution of an FTC event. We were able to learn the best way to assemble the field,...
Iron Reign has been a team for 8+ years now through multiple competitions. We started as a wee middle school FLL team at W.B. Travis, and we've grown exponentially since then. We've competed in MoonBots and FTC, represented our school at SuperRegionals, presented at the National Science Teachers' Association covention, and built our own RV in order to serve underpriveledged communities accross the Dallas Metroplex. But, after the current original team members...
Today we went to Travis Middle School for their high school night where they have many high schools competing to enroll their graduating 8th graders. Travis is a Talented and Gifted school and about half of our team came from there. Mr. Newton was our lead presenter. He is a DISD teacher of the year and the...
Today, we brought the Dallas City of Learning MXP (Mobile Learning Lab) to 4H’s Youth Technology Explosion in coordination with the Black Society of Engineers. Our role in this event was to offer a hands on experience for those interested in a career in engineering. We usually have three different activities: MinecraftEDU, Sumo Robotics, and CAD Keychains. MinecraftEDU runs on three computers...
On Monday, we went to the DISD Coaches' Meeting in order to present our robot to the FIRST DISD coordinator and other coaches in the district. This presentation was one of the reasons we got our robot working so quickly. During the presentation our coach talked with other coaches and the coordinator about funding and tounaments, while we presented in the...
Earlier this morning, we drove the Mobile Tech Experience RV to LV Stockard Middle School and participated in a DISD event. We served around 250 kids, ages ranging from preschool to middle school. The morning started off slow, but as the day went on, the MXP became more and more crowded. Our spot was near...
Today, we brought the Dallas City of Learning MXP to Conrad High School to support Dallas ISD's parent outreach fair call PrepU Super Saturday. The focus for this Super Saturday was making parents aware of extracurricular activities available to their students in DISD. So this was a perfect event to let parents know...
Today, Iron Reign was invited to the Frontier of Flight Museum by Dallas Love Field Airport for a day of STEM knowledge for its annual "Moon Day". It was time for us to bring in the LEGO robotics kit, 4 laptops for kids, ARGOS, and Juggernaut, our competition bot from this past season. Upon arrival at the museum, we noticed many other fascinating stations such as one explaining NASA's new rover...
Today, we brought the MXP to the DISD Discover Summer Resource Fair. We talked to about 250 people, including the Mayor of Dallas. We helped about 50 people create and print keychains using Google Sketchup. In the front of the RV, we introduced about 200 people to Lego Robotics, and assisted them in creating sumo bots. The goal of this event was to inspire...
The Meyerson Symphony Center hosted a Microsoft YouthSpark event this Saturday with activities from robotics to VR to 3D printing. We set up the sumo laptops up in the atrium and the 3D in the MXP outside, right next to the Perot tech van. The tech van had most of their setup outside with...
We have had a lot of interest garnered towards the STEM outreach the team has committed to. When we found that FTC encouraged the creation of a video outlining the STEM outreach we had done, we saw it as an opportunity to show others a general overview of our activities. With Max's excellent voiceover, we made a video talking about how long the team's been at it, the various...
The Yale club of Dallas organized a STEM event for groups of girls in the city. We took the Mobile Tech XPerience out front for 3D modelling and set up 8 EV3s with laptops and a sumo field inside. We led 6-8 girls at a time through...
Since we had the general idea of the shape and size of the actual pit tent, we set out to either build or find a tent that we felt best fit the theme we selected. We chose to start off by trying to build a structure via PVC pipe and a tarp like substance that we could drape over the pipe, we...
Iron Reign members left to right are Ethan Helfman (Build, Communications), Janavi Chada (Programming, Communications), Tycho Virani (Programming Lead, Main Driver), Jayesh Sharma (Business Lead, Build, Communications), Darshan Patel (Build), Lin Rogers (Communications Lead, Logistics, Business) and Charlotte Leakey (Programming, Logistics), with Evan Daane (from BTW, Build, Photography) in repose. Not shown: Max Virani (Design Lead, Programming), Omar...
The Great One, Aqui'la, has slumbered for too long. Since the deity lost Its battle with the accursed Gravitae a year ago, Its physical form has crumbled to pieces, leaving It powerless to bend the world to our will. As the last High Priest and Grand Memer of Its reign, the duty falls to me to return It to Its full power so that It may reign once more. I must do more than rebuild its effigy,...
For the past year or two, we've brought along a big vertical banner to our competitions to help boost our presence and make it easier for judges, other teams, and even members of our own team to find us in the pits or on the field. But the banner we've been using has become outdated: Since last year, members have come and gone, we've decided on a different visual theme, and, of course, we've built an entirely new...
The RV has been fully remodeled and set up with netbooks and 3D printers, so we have been making the rounds and teaching at camps and events. We try to limit the number of kids on board to under 15 or 12 for safety reasons. It'd be nearly impossible to fit...
The Dallas City of Learning Organization held a Turn Up event at the Frontiers of Flight Museum, where we staffed the Mobile XPerience (MXP) complete with laptops, 3D printers, and LEGO SumoBots. Outside the vehicle, Lin and I taught kids how to create 3D models...
On 18 June, we went to the J. Erik Jonsson Library to inspire children to hopefully go into STEM-related careers. We were invited for their annual City of Learning event. We talked to about 200 people about robotics and most loved it - especially children. We showed...
Day 1 was a huge success, and we carried that over into the Sunday presentations too. There were a lot of common questions we noticed from Saturday, including levels of robotics competitions and the LEGO EV3 system, and we were able to answer these with more clarity after hearing them so often. A few papers were set up on our table outlining the various FIRST competition...
In the middle of Saturday's event we decided it would be a GREAT idea to put the competiton robot on the hoverboard and try to drive it around. Theoretically if we got it centered correctly it could only drive forward and backwards. We could extend...
"Kids are invited to “Turn Up!” to make, create, craft, play and learn at the Dallas Public Library on Saturday June 20. The Dallas City of Learning free family event will be from 1 to 4 p.m. on various floors at the J. Erik Jonsson Central Library, 1515 Young St." Iron Reign was...
Dallas Back to School Fair
Read More
Task: Present at the Dallas Back to School Fair at O.W. Holmes
Next Steps
Best Buy Grant
Read More
Task: Receive a grant from Best Buy for continued MXP operation
SEM Nest Outreach
Read More
Task: Present about STEM to new freshmen at SEM
Moon Day 2018
Read More
Task: Reach out to the community and spread the magic of robotics
Central Public Library Outreach Event
Read More
Task: Present at the J. Erik Jonsson Public Library
2018-2019 Recruitment
Read More
Task: Recruit members for the upcoming robotics season
Turn Up! at Dallas Love Field
Read More
Task: Present at the Dallas Love Field for the DCOL Turn Up! Event
School of Science and Engineering Freshman Orientation
Read More
Task: Speak to 200 prospective recruits about Iron Reign
Iron Reign earns FTC World Championship Motivate Award
Read More
Top Row: Justin Bonsell, Christian Saldana, Charlotte Leakey, Tycho Virani, Evan Daane, Austin Davis
Bottom: Janavi Chadha, Kenna Tanaka, Abhijit Bhattaru, Karina Lara and Ethan Helfman
coached by Karim Virani, Cathy Lux and Calvin Boykin Championship Scouting Sheet
Read More
Task: Publish Scouting Sheet for Houston
Discover Summer PREP U
Read More
Task: Volunteer at the DISD Discover Summer PREP event
iMake 2018
Read More
Task: Present at the Fort Worth Science Museum iMake Festival
Joining Iron Reign
Read More
The Transition from Imperial to Iron Reign
OK Regional Keychains
Read More
Task:
We came to the Oklahoma Regional woefully unprepared for the amount of stuff other teams would give out. As soon as we arrived, we received every trinket imaginable. There were keychains, pins, 3D-printed symbols, business cards, patches, and tons of other creative designs. Luckily, the MXP was there and had 4 3D printers on board. Normally, we use them to print out keychains for kids during...
DISD STEM Fair
Read More
Helping Other Teams
Read More
Task: Help a rookie FTC team
How to Make a Robotics Team in 7 Easy Steps!
Read More
Task:
So you want to make a robotics team? No fear! We'll show you how to in 7 easy steps! 
First(get it), familiarize yourself with the FIRST Robotics Competition. Then locate your region’s Regional Director or FIRST Senior Mentor. These people know the FIRST teams, participating schools, and FIRST-friendly businesses in your area. He or she can help you form...
DISD STEM Expo Preparation
Read More
Task: Prepare for DISD STEM Expo
Townview Qualifier 2017
Read More
Qualifier Preparation
Read More
DISD Scrimmage
Read More
Task: Run and compete at the DISD Scrimmage
Iron Reign and Substainability
Read More
Iron Reign's Substainability
So, You Want to Build Your Own RV
Read More
How to build your own RV in 6 easy steps.
Travis High School Night
Read More
Encourage students at Travis to enroll at our School of Science and Engineering (SEM)
MXP at UTA
Read More
MXP at UTA
DISD Coaches' Training
Read More
Task: Present at the DISD Coaches' Training
MXP Event at LV Stockard Middle School
Read More
STEM education for children and their parents at a DISD event
MXP at Conrad HS
Read More
Sharing STEM opportinities with kids and their families at Conrad HS
Moon Day at Frontier of Flight Museum
Read More
Task: Present at the MoonDay Event
Turn Up! 2017 at Frontiers of Flight
Read More
Task:
Each year the Frontiers of Flight Museum hosts the Turn Up!, an event that contains STEM exhibits and demonstration to teach kids about the wonders of Science and Math. We brought the Mobile XPerience (MXP) complete with laptops, 3D printers, and LEGO SumoBot to help teach. Outside the RV we had laptops set up where we...
Discover Summer Resource Fair
Read More
Task: Present to kids at the Discover Summer Resource Fair
YouthSpark with Microsoft
Read More
Task: Mobile Tech XPerience's appearance at the Meyerson
Promote Video 2017
Read More
Task: Create a video outlining Iron Reign's outreach
Dallas Women in STEM
Read More
Task: Teach LEGO EV3 and 3D modelling to girls
Programming
Meet me in the pit- Tent and Shields
Read More
Tent Building
Inspire Award
Read More
1st Place at North Texas Regional Championship
I Am Become Aquila, Destroyer of Worlds
Read More
Task: Resurrect the Ancient One
The Imperator Will See You Now
Read More
Task: Design a new banner
Centurion's Helm of +2 Swankiness
Task: Make some Roman helmets for the team
Read More
Mobile Learning Lab in Action
Read More
Task: Deploy the Mobile Learning Lab to camps and teach kids
Turn Up! at Frontiers of Flight with DCOL
Read More
Inspiring 1,000 People to Turn Up with STEM
Written by Janavi Chadha
Dallas City of Learning
Read More
Task: Teaching children how to use robots
Day 2 of iMake
Read More
Task: Continue presenting at iMake
Robot On a Hoverboard - Try 1
Read More
Task: Try to drive the hoverboard with the competition bot
Discovery Faire at the Dallas Downtown Library
Read More
Task: Present at the Dallas City of Learning Discovery Faire
Quote from Dallas City News Article
